PLCC Extraction Tool,Koko-go Electronic Co., Ltd

Product Name: IC Lifter Hot Air Gun IC Lifter Dedicated to chip for soldering station.

Weight: 30g

Packing: Blister packaging

Packaging specifications: 145 * 75 * 18mm

product manual:

ROM extractor for PLCC package dedicated IC chip, extract the motherboard BIOS special extractor designed for PLCC. The body is made of stainless steel, which is suitable for PLCC of different specifications.

1. PLCC can be easily taken out of the substrate without hurting any IC conductor. Can pull out PLCC, PGA, PCLL, DIP packaged IC in SOCKET or PCB.

2. Use the handshake method to pull the IC smoothly in the vertical direction (not forcibly pull it up), so that the pulled out IC can get a complete PIN.

3. The densely arranged IC can be directly pulled out without moving to other ICs.

4. ICs with different sizes within 5.5cm of the contact surface can be pulled out in a short time, which is easy to operate and labor-saving.

Remove the PLCC chip. If you use a flat-blade screwdriver, it is very uncomfortable because there are other components around it. If there is no special extraction clip, it is difficult to remove. Improper operation will cause damage to the socket or chip, and even cause chip crack Broken foot. The chip lifter we prepared for you can be directly used on the board, which is convenient for pulling out the PLCC packaged chips. It is a good tool for lifting various chips and integrated blocks for motherboards, microcontrollers, and programmers.

This is a PLCC chip lifting clamp, which is more suitable for easily pulling out the PLCC chip.

PLCC size: 20 feet to 84 feet.

Specifically, the two pins of the pull-out clip are respectively inserted from the two notches of the chip socket, and then the clip is gripped, and the clip is slightly hard to pull out the chip conveniently. For PLCC packaged chips, due to its special package form, special chip extraction clips are used to operate. Use the ROM extractor to clamp one corner and the opposite corner of the BIOS chip. Press the extraction clamp and pull the chip straight out of the socket. Note that it must be the corner where the chip is not beveled, and the claw of the extractor should be inserted as far as possible into the socket. When removing the chip, you must be very careful. Improper handling or improper force may damage the motherboard or the BIOS chip itself.


Item：	IC Extraction tool-831	Product Name：	PLCC Extraction Tool
Descriptions：	Product Name: IC Lifter Hot Air Gun IC Lifter Dedicated to chip for soldering station. Weight: 30g Packing: Blister packaging Packaging specifications: 145 * 75 * 18mm product manual: ROM extractor for PLCC package dedicated IC chip, extract the motherboard BIOS special extractor designed for PLCC. The body is made of stainless steel, which is suitable for PLCC of different specifications. 1. PLCC can be easily taken out of the substrate without hurting any IC conductor. Can pull out PLCC, PGA, PCLL, DIP packaged IC in SOCKET or PCB. 2. Use the handshake method to pull the IC smoothly in the vertical direction (not forcibly pull it up), so that the pulled out IC can get a complete PIN. 3. The densely arranged IC can be directly pulled out without moving to other ICs. 4. ICs with different sizes within 5.5cm of the contact surface can be pulled out in a short time, which is easy to operate and labor-saving. Remove the PLCC chip. If you use a flat-blade screwdriver, it is very uncomfortable because there are other components around it. If there is no special extraction clip, it is difficult to remove. Improper operation will cause damage to the socket or chip, and even cause chip crack Broken foot. The chip lifter we prepared for you can be directly used on the board, which is convenient for pulling out the PLCC packaged chips. It is a good tool for lifting various chips and integrated blocks for motherboards, microcontrollers, and programmers. This is a PLCC chip lifting clamp, which is more suitable for easily pulling out the PLCC chip. PLCC size: 20 feet to 84 feet. Specifically, the two pins of the pull-out clip are respectively inserted from the two notches of the chip socket, and then the clip is gripped, and the clip is slightly hard to pull out the chip conveniently. For PLCC packaged chips, due to its special package form, special chip extraction clips are used to operate. Use the ROM extractor to clamp one corner and the opposite corner of the BIOS chip. Press the extraction clamp and pull the chip straight out of the socket. Note that it must be the corner where the chip is not beveled, and the claw of the extractor should be inserted as far as possible into the socket. When removing the chip, you must be very careful. Improper handling or improper force may damage the motherboard or the BIOS chip itself.